Single float switch for 115V Multiquip pumps rated up to 1/2 HP
Single float that is used to turn the pump on and off as the water level rises and falls.
Ideal for use when the water level lies in a fairly tight range.
The power cable for the pump "piggy backs" (plugs) into the back of the power cable for the float switch (like your christmas tree light plugs). This way the float switch controls when the pump gets its power.
|
Levels from 5.5" to 18"
14 gauge cord
piggyback plug
UL and CSA listed
Weight: 2 lbs (0.9 kg)
|
